Gently cleans all floors. Does not damage treated or delicate surfaces. Essential for cleaning after laying natural stone floors with a polished finish that are sensitive to strong detergents.
Product advantages:
- Cleans but does not destroy the material.
- With a large dilution (1:200), rinsing is not necessary, since the product leaves no traces.
- Highly concentrated, can be used with varying degrees of dilution.
- High degree of biodegradability.
- Ideal for caring for all waxed surfaces.
- Can be used in wet cleaning machines with a high degree of dilution (starting from 1:200).
- Great for laminate flooring.
| The attachment | Size |
|---|---|
 Technical map | 310.68 KB |
There are 2 Comments
Application
For routine care of all types of surfaces : Dilute FILACLEANER in a ratio of 1:200 (25 ml per 5 liters of water).
No rinsing required. To remove more stubborn stains, you can use a solution of higher concentration. For cleaning delicate surfaces after installation (marble, travertine, granite, glossy agglomerates, etc.): Dilute FILACLEANER in a ratio of 1:30 and spread over the surface with a hard sponge or a single-disc machine with a soft disc.
Collect residues with a cloth or wet vacuum cleaner. At the end of the procedure, rinsing is required. For wet vacuum cleaners : Dilute FILACLEANER in a ratio of 1:200.
Pour the solution into the tank. For normal care of very dirty surfaces : Dilute FILACLEANER in a ratio of 1:30 to 1:50 depending on the degree of contamination. Wash with a rag and a hard sponge. Collect dirt and rinse.
- Login to leave comments
Attention
Do not use this product on carpeted or waxed wood floors.
- Login to leave comments