Dictionary

A (5) | B (5) | G (5) | D (6) | Z (3) | And (1) | K (12) | M (3) | N (1) | O (4) | P (10) | R (3) | C (5) | T (7) | U (1) | F (3) | C (1) | H (1) | Ш (1) | E (1)

Sep

2015

Adhesive break (AF-S or AF-T)

iceramica

The gap along the boundary surface between the mortar or adhesive and the base is designated AF-S (Appendix A, Figure A.1); the gap between the tile and the mortar or adhesive is designated AF-T (Appendix A, Figure A.2). In both cases, the test results are equal to the adhesive strength. According to EN 12004.

Sep

2015

Adhesion

iceramica

A surface phenomenon leading to adhesion between dissimilar materials brought into contact under the influence of physicochemical forces. According to FES.

Sep

2015

Anhydrite

iceramica

Mineral chemical composition Ca[SO ₄ ]. The system is rhombic. Dense masses or leafy aggregates are common. Thick tabular, prismatic, and sometimes pseudocubic crystals are rare. Color white, grayish, bluish, reddish. According to TSB.

Sep

2015

Angobated surface

iceramica

A thin layer of clay slurry applied to the surface of a ceramic tile or slab that has a matte appearance may be permeable or waterproof. According to EN 14411.

Sep

2015

Reinforcing fiber

iceramica

Natural or artificial fiber of a certain length and cross-section, used in the composition of dry mixtures as an element of discrete (local) reinforcement of a hardened solution. According to GOST 31189.

For any suggestions regarding the site: [email protected]

Для любых предложений по сайту: [email protected]

Search form

Dictionary