Adhesive mixtures must comply with the requirements of the GOST R 56387 standard and be manufactured according to technological documentation approved by the manufacturer. The main indicators of the quality of adhesive mixtures in the hardened state are ...
Strength of the adhesive bond (adhesion) after exposure to an aqueous environment
Strength of adhesive bond (adhesion) after exposure to high temperatures
Wetting ability
Strength of adhesive bond (adhesion) after cyclic freezing and thawing
Transverse deformation
Open time
Strength of the adhesive bond (adhesion) after exposure to an air-dry environment
Material on this issue is presented in the GOST R 56387 .
Adhesive mixtures must comply with the requirements of the GOST R 56387 standard and be manufactured according to technological documentation approved by the manufacturer. The main indicators of the quality of adhesive mixtures ready for use (freshly prepared) are ...
Minimum Density
Average density
Water holding capacity
Humidity
Resistance to slippage
Maximum Density
To mix (dilute, mix) cement adhesive mixtures of class C1, it is necessary to use...
Vegetable oil
Water
Adhesive milk
Primer
PVA - emulsion of polyvinyl acetate in water, with a plasticizer and special additives
Water-based latex mixture
Water latex
Synthetic oil
Material on this issue is presented in technical data sheets for cement adhesive mixtures.
What requirements must be met for adhesive mixtures in a dry state?
The moisture content of adhesive mixtures should not exceed 0.30% by weight
The content of grains larger than 0.63 mm in the adhesive mixture should not exceed 0.50%
The amount of cement in the adhesive mixture must exceed 35% of the mass
The bulk density of the adhesive mixture should not exceed 1600 kg/m3
The largest grain size of the adhesive mixture should not exceed 0.63 mm.
The specific effective activity of natural radionuclides of adhesive mixtures should not exceed the limit values established by GOST 30108
Adhesive mixtures must comply with the requirements of the GOST R 56387 standard and be manufactured according to technological documentation approved by the manufacturer. The main indicators of the quality of adhesive mixtures in a dry state are ...
Color
Content of grains of the largest coarseness
Bulk density
Low dust generation
Largest aggregate grain size
