Dry adhesive mixtures based on cement binder

Page 1 of 5

Question 1

What requirements must be met for adhesive mixtures in a dry state?

The content of grains larger than 0.63 mm in the adhesive mixture should not exceed 0.50%

The amount of cement in the adhesive mixture must exceed 35% of the mass

The largest grain size of the adhesive mixture should not exceed 0.63 mm.

The specific effective activity of natural radionuclides of adhesive mixtures should not exceed the limit values ​​​​established by GOST 30108

The moisture content of adhesive mixtures should not exceed 0.30% by weight

The bulk density of the adhesive mixture should not exceed 1600 kg/m3

For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]