Keracem Eco Pronto

Keracem Eco Pronto

Ready-to-use mineral screed. It is characterized by high dimensional stability, increased mechanical strength, excellent thermal conductivity, which is a necessary quality when laying heated floors to achieve the highest performance of the underfloor heating system and uniform heat distribution. Layer thickness from 20 to 80 mm.

PURPOSE. Screeds with normal setting and fast drying, bonded to a base thickness of 20 mm, and floating, with a thickness of more than 40 mm. Maximum thickness 80 mm.

APPLICATION. Keracem Eco Pronto is applied in a reliable and practical way, following the traditional steps of creating cement screeds: preparing levels, laying and compacting the mass, leveling with a rule and final smoothing with a trowel or mechanized means. To achieve higher mechanical performance, the screed compaction operation is particularly important. It must be performed immediately after laying the screed on the base before leveling the surface using a mechanical rule.

9.66667
Average: 9.7 ( 3 votes)
The attachmentSize
PDF icon Technical map573.53 KB

Keracem Eco Pronto - installation

There are 2 Comments

User avatar Vasily Petyaev

Anyone who has worked with this product, please clarify whether it is possible to compact the mass using a manual tamper? To carry out work at home, you don’t want to spend money on electrical equipment, which is shown in the video.

User avatar Denis Enko

You can carry out work (preparation, application) with the Keracem Eco Pronto product using hand tools. This may be appropriate for small volumes of work (10-15 bags of product), for sealing and repairs, and if you want to reduce noise from the work being carried out. The result when using a hand tool (a shovel, a rammer, usually a trowel) is comparable to the result when using a power tool (a concrete mixer with a tipping drum or a pneumatic mixer, a steel rotary disk). In our practice, we used Keracem Eco Pronto for heated floors and for filling holes and uneven areas. There were no problems during further operation.

If the cost of the product is acceptable to you, then feel free to buy it; you can carry out work using hand tools.

For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]