3
Keracem Eco
Mineral hydraulic binder is used to prepare screeds with high dimensional stability. Consumption: 2.5 kg/m2 per 1 cm of thickness.
The company's history began in 1968, when Romano Sghedoni began producing tile adhesives in his garage and founded Kerakoll in Sassuolo, Modena (Italy), the center of the world's ceramic industry. In 1978, a one-component cement-based adhesive was invented - H40 Flex - which is the company's flagship product. This was a big step for the ceramics industry, providing a safe and reliable way to fasten homogeneous materials and high load slabs.
Today, thanks to the presence of 20 product lines and more than 1,700 types of eco-compatible materials, Kerakoll produces 950,000 tons of products per year, using 470,000 tons of regional materials, 220,000 tons of natural materials obtained through recycling. All of the company's products are CE marked, which confirms compliance with the most stringent European and international standards. In addition, only Kerakoll products are labeled ECO and BIO, in accordance with the GreenBuilding Rating standard, certified by SGS - the world's largest center for monitoring systems and certificates for consumers who want to receive only environmentally compatible and natural products.
Company website: www.kerakoll.com
Mineral hydraulic binder is used to prepare screeds with high dimensional stability. Consumption: 2.5 kg/m2 per 1 cm of thickness.
Ready-to-use mineral screed. It has high dimensional stability and increased mechanical strength. Consumption: 17 kg/m2 per 1 cm of thickness.
Guarantees continuity of aesthetic, functional and hygienic properties of glass mosaic. Seam width from 0 to 3 mm.
Joint filler with pure natural lime, normal setting time, increased color fastness. Seam width from 0 to 8 mm.
C2FTE. Quick-setting mineral adhesive for high-strength installation of marble and natural stone. Layer thickness up to 15 mm.
R2TE. Adhesive for high-strength installation with increased adhesion on deformable substrates. Layer thickness up to 10 mm.
Joint filler with increased workability and ease of rinsing, waterproof and stain-resistant. Seam width from 0 to 20 mm.
Water-based product for strengthening absorbent substrates before leveling or laying. Consumption: 0.5-2 kg/m2.
C2TE-S1. Gel adhesive is designed for gluing ceramics and natural stone to most known substrates. Layer thickness up to 15 mm.
Organic mineral waterproofing, water-based, for absorbent substrates in damp areas. Consumption: 1.5 kg/m2 per 1 mm of thickness.
